Interfacial Bond-Slip Model for CFRP Plate Externally Bonded to Corroded Steel Plate

The purpose of this study is to establish the interfacial bond-slip model for CFRP plate externally bonded to corroded steel plate. The present bond-slip models for CFRP materials bonded to uncorroded steel plate were first reviewed. Thirty-four double-lap joints were tested to investigate the effect of corrosion duration and adhesive thickness on the bond behavior between CFRP plates and corroded steel plates, and the bond-slip curves for the bonding interface with different adhesive thickness and corrosion duration were obtained combined with the CFRP plate strain distribution data. A new bond-slip model for CFRP plate externally bonded to corroded steel plate was proposed, and the expression of the characteristic parameters, which included the maximum bond resistance τf, the relative slip at the peak bond stress s1, the fitting parameter α, and the interfacial fracture energy Gf, were also developed based on the careful regression analysis of the present data. The influence of the corrosion duration and construction adhesive thickness on the bond-slip relationship were accounted together and expressed as a new parameter; that is, the effective adhesive thickness teff. The comparison between the predicted values and experimental results indicated that the proposed bond-slip model can be applied to reproduce the structural response of the CFRP plate-corroded steel plate double-lap joint with reasonable accuracy. The outcome of this study can provide meaningful references and essential data for the reliable application of CFRP strengthening systems in the performance improvement of corroded steel structures.