3D Composite PDMS/MWCNTs Aerogel as High-Performing Anodes in Microbial Fuel Cells

Porous 3D composite materials are interesting anode electrodes for single chamber microbial fuel cells (SCMFCs) since they exploit a surface layer that is able to achieve the correct biocompatibility for the proliferation of electroactive bacteria and have an inner charge transfer element that favors electron transfer and improves the electrochemical activity of microorganisms. The crucial step is to fine-tune the continuous porosity inside the anode electrode, thus enhancing the bacterial growth, adhesion, and proliferation, and the substrate's transport and waste products removal, avoiding pore clogging. To this purpose, a novel approach to synthetize a 3D composite aerogel is proposed in the present work. A 3D composite aerogel, based on polydimethylsiloxane (PDMS) and multi-wall carbon nanotubes (MWCNTs) as a conductive filler, was obtained by pouring this mixture over the commercial sugar, used as removable template to induce and tune the hierarchical continuous porosity into final nanostructures. In this scenario, the granularity of the sugar directly affects the porosities distribution inside the 3D composite aerogel, as confirmed by the morphological characterizations implemented. We demonstrated the capability to realize a high-performance bioelectrode, which showed a 3D porous structure characterized by a high surface area typical of aerogel materials, the required biocompatibility for bacterial proliferations, and an improved electron pathway inside it. Indeed, SCMFCs with 3D composite aerogel achieved current densities of (691.7 ± 9.5) mA m^-2, three orders of magnitude higher than commercial carbon paper, (287.8 ± 16.1) mA m^-2.