Fabrication of Electrospun Cellulose Acetate/Nanoclay Composites for Pollutant Removal

The creation of eco-friendly clay-based composites for pollutant removal by adsorption still remains a challenge. This problem might be successfully solved by the development of electrospun polymer-clay composites. For the first time in this study, a one-step fabrication of cellulose acetate (CA) fibers filled with commercially available nanoclays (NCs) was described. The optimal ratio at which CA/NCs dispersions remained stable was accomplished by varying the nanoclay concentration with respect to CA. Furthermore, the selected solvent system and the electrospinning conditions allowed for the successful fabrication of electrospun CA/NC composites. It was found that the composites' surface morphology was not affected by the incorporated nanoclays and was the same as that of the electrospun CA fibers. The performed analyses clearly showed that CA and nanoclays did not react during the electrospinning process. It was found that the distribution of nanoclay layers probably was a mixture of intercalated and exfoliated structures. Notably, the type of the nanoclay strongly influenced the adsorption ability of CA/NC composites toward Cr(VI) ions and MB dye. These results suggested that the fabricated CA/NC composites are suitable for pollutant removal due to their specific structure.