Phase Change Energy Storage Material with Photocuring, Photothermal Conversion, and Self-Cleaning Performance via a...

Compared with the thermal curing process, the photocuring process has advantages such as high efficiency and less energy consumption. However, the preparation of photocurable phase change materials (PCMs) with photothermal conversion and self-cleaning properties is challenging due to the conflict between the transparency required by the photocurable resin system and the opacity deduced by the large number of fillers required by photothermal conversion and the negative effect of filler steric hindrance on the reaction rate and crystallinity. In this work, a "thiol-ene" click chemical reaction induced using UV was used to prepare photocurable PCMs, followed by spraying a carboxylated multiwalled carbon nanotube (CCNT) suspension (with ethyl acetate) onto the surface to achieve an effective two-layer composite of the PCM and CCNTs, by which the rough surface of the PCM and the interaction offered by the hydrogen bonds on the interface of the PCM and the CCNTs provide sufficient adhesion for the two phases. The "thiol-ene" cross-linked polymer network provided shape stability as a support material. 1-Octadectanethiol (ODT) and beeswax (BW) were encapsulated in the cross-linked polymer network as phase change components, providing phase change latent heat. The CCNT layer provided excellent photothermal conversion and self-cleaning properties. The experimental results show that the latent heat of the PCM can reach 124.2 J/g, the water contact angle is 144°, the photothermal conversion efficiency reaches 75%, and it has significant self-cleaning performance. To the best of our knowledge, this is the first report on a photocurable PCM with photothermal conversion and self-cleaning properties.