Related Experiment Video
Updated: Aug 17, 2025
Picoinjection of Microfluidic Drops Without Metal Electrodes
Published on: April 18, 2014
Injection strategy for effective bacterial delivery in bioaugmentation scheme by controlling ionic strength and
Eunjie Kwak1, Jae-Hyun Kim1, Jae-Woo Choi2
1Department of Earth and Environmental Sciences, Korea University, 145, Anam-ro, Seongbuk-gu, Seoul, 02841, Republic of Korea.
Abstract:
For the in-situ remediation of the contaminated subsurface environment, the injection of nutrients and microorganisms changes chemical and physical conditions, which control the delivery and immobilization of microorganisms. We investigated the injection strategy for effective bacterial delivery in a bioaugmentation scheme by controlling ionic strength (IS) and pore-water velocity (v). A set of bacterial transport tests was conducted using the saturated sand column to mimic the saturated subsurface environment. The effectiveness of the injection strategies was evaluated by applying solutions with different ionic strengths into the sand column with different pore-water velocities. The deposition and delivery of bacteria through the sand column were analyzed using the first-order deposition model. The deposition and delivery of bacteria injected by various strategies were numerically simulated considering the variable deposition rate. The breakthrough curves from column experiments revealed that the bacterial deposition on the sand surface was increased by an increase in the ionic strength and by a decrease in the pore-water velocities. The rates of bacterial deposition (k1) on sand could be determined as a function of ionic strength and pore-water velocity, and it was applicable to simulate the delivery of bacteria under dynamic groundwater conditions. The numerical case study considering various injection strategies showed that the nutrient concentration controlled the bacterial delivery to the target area more significantly than the injection flow rate. Injection of bacterial solution with lower nutrient concentration could be increased the deposited bacterial concentration at the target point (Stp) by 6.2-7.1 times higher. Short pulse injection with a high injection rate decreased Stp by 67-78%. The efficiency of bacterial delivery (Ed) could be increased three times higher by lowering nutrient concentration in the injection solution. The process of evaluating the efficiency of bacterial delivery could be a prominent approach to determining the injection strategy for in-situ remediation considering variable conditions of a contaminated site.
Related Concept Videos
01:17Pore Transport and Ion-Pair Transport
Pore transport, also known as convective transport, is a process where small molecules like urea, water, and sugars rapidly cross cell membranes as though there were channels or pores in the membrane. Although direct microscopic evidence is limited but the concept of pores or channels is widely accepted based on physiological evidence. Despite the lack of direct...
01:25Routes of Drug Administration: Parenteral
The intravenous route (IV) of drug administration can be further categorized into two types. The bolus injection administers the entire dose rapidly, while an intravenous infusion slowly delivers smaller doses steadily.
The IV route is often...