Related Experiment Video

Updated: Aug 17, 2025

Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating
10:39

Measurement of X-ray Beam Coherence along Multiple Directions Using 2-D Checkerboard Phase Grating

Published on: October 11, 2016

9.7K

Method for parallelism measurement of geometrical waveguides based on the combination of an autocollimator and a

Yong Yang, Meirong Zhao, Yelong Zheng

    Optics Express
    |December 16, 2022
    PubMed

    More Related Videos

    A Technical Guide for Performing Spectroscopic Measurements on Metal-Organic Frameworks10:13

    A Technical Guide for Performing Spectroscopic Measurements on Metal-Organic Frameworks

    Published on: April 28, 2023

    2.5K
    The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry12:14

    The Generation of Higher-order Laguerre-Gauss Optical Beams for High-precision Interferometry

    Published on: August 12, 2013

    21.9K

    Related Concept Videos

    Design Example: Measuring Distance Between Two Points with Obstructions01:10

    Design Example: Measuring Distance Between Two Points with Obstructions

    When measuring distances in areas with physical obstructions, such as a lake in a field, surveyors must employ techniques to calculate accurate lengths without direct line measurements. One effective method is the offset technique, which allows for precise distance estimation over inaccessible stretches.In this scenario, a surveyor must measure a side of an area that crosses a lake. Since the measuring tape cannot span the lake, the surveyor begins by establishing a baseline that aligns with...
    82
    Adjusting a Traverse01:12

    Adjusting a Traverse

    In the site survey of a four-sided traverse, internal angles are essential to ensure geometric accuracy. The survey revealed that the sum of the measured internal angles was 359 degrees and 48 minutes, which is 12 minutes less than the expected 360 degrees. This discrepancy signals an error likely arising from measurement inaccuracies during the fieldwork.To rectify this error, the adjustment process involved distributing the 12-minute shortfall equally across the four internal angles. By...
    91
    Common Leveling Mistakes and Errors01:17

    Common Leveling Mistakes and Errors

    A survey team is tasked with determining the elevation difference between points Point A and Point B, separated by uneven terrain. They use a leveling instrument and a leveling rod.Common MistakesMisreading the Rod: During a backsight reading at Point A, the instrumentman observes the rod partially obscured by tall grass. Instead of reading 1.135 m, they mistakenly record 1.735 m due to the misalignment of the crosshair with the wrong graduation. This error adds 0.600 m to all subsequent...
    109