Waste bamboo framework decorated with α-FeOOH nanoneedles for effective arsenic (V/III) removal

Arsenic pollution of water is one of the severest environmental challenges for human health, and adsorption is the most often used technique in investigations of selective As removal. However, the development of low-cost and easily recoverable adsorbent for aqueous arsenic adsorption remains a challenge. In this work, the α-FeOOH-decorated monolith bamboo composites (α-FeOOH/MB) were fabricated via directly decorating α-FeOOH nanoneedles on the waste bamboo framework without pre‑carbonization. As expected, the as-prepared α-FeOOH/MB exhibits considerably increased adsorption capacity for aqueous arsenic over pure α-FeOOH nanoneedles, with increases of 1.88 and 1.52 times for As(V) and As(III), respectively. Meanwhile, the α-FeOOH/MB composites exhibit positive reusability (recovering 89.73 % and 80.17 % adsorption capacity for As(V) and As(III) after 5 cycles) and are easy to separate after water treatment. Furthermore, the α-FeOOH/MB composites exhibit high arsenic adsorption selectivity even in the presence of competing anions. Overall, the as-obtained α-FeOOH/MB composites, reuse of waste bamboo, are a kind of favorable candidate for arsenic decontamination in practical application owing to the high adsorption capacity, low-cost and facile separation features.