Influence of metal oxide catalyst on co-pyrolysis of biomass and COVID-19 waste
Related Experiment Video
Updated: Aug 16, 2025

Temperature-programmed Deoxygenation of Acetic Acid on Molybdenum Carbide Catalysts
Published on: February 7, 2017
N Tamilarasan1, R Sakthivel1, K Balaji1
1Department of Mechanical Engineering, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Coimbatore 641112, India.
Abstract:
The disposal of waste generated by the COVID-19 pandemic is still a challenge to the government in most countries. The present study shines its light on the catalytic effect of metal oxide on converting COVID-19 waste i.e. used face masks into valuable products through co-pyrolysis. The co-pyrolysis trial was carried out for a mixture of waste face mask (WFM) and Moringa oleifera (MO) biomass at a constant temperature of 450°C for 15 min of resident time. This investigation focuses on studying the catalytic effect of calcium oxide (CaO) on the by-products of the pyrolysis process. From the FT-IR studies, it is observed that the CaO catalyst assisted to reduce oxygen as well as sulphur and carboxylic acids in the bio-oil due to its strong basic nature. The FE-SEM images suggest the increase in porous structure with catalytic pyrolysis (CP) char compared to non-catalytic pyrolysis (NCP) char. The catalytic activity of CaO increased the alcoholic content with a reduction in aldehydes and ketones in the bio-oil. The addition of WFM to the biomass with CaO catalyst pyrolysis (CP) delivered a higher oil yield of 52% compared to non-catalytic pyrolysis (NCP).
More Related Videos
09:46Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization
Published on: May 19, 2019
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Related Concept Videos
Catalysis
Microbial Fermentation
Bioremediation