Itraconazole-loaded microemulsions: formulation, characterization, and dermal delivery using shed snakeskin as the...

Microemulsions (MEs) were developed for dermal delivery of 1% w/w itraconazole (ITZ). Solubility of ITZ in various oils was investigated and clove oil was selected as oil phase. Pseudoternary phase diagrams were constructed by titration method. The system containing clove oil as oil phase, Tween^®80 as surfactant, and 1:1 mixture of water and polyethylene glycol 400 as aqueous phase provided the largest ME region. It was selected for the formulation development of ITZ-loaded MEs. Physicochemical stability was evaluated at 4 °C, room temperature (25 °C), and 45 °C for three months. In vitro permeation and retention studies were assessed using shed snakeskin as a model membrane. Antifungal activity was investigated by agar diffusion method. Results indicated that incorporation of ITZ in the selected MEs did not affect physical properties. Physicochemical data after storage periods revealed that the most suitable storage temperature was 4 °C. Skin permeation and retention data indicated that water-in-oil (w/o) ITZ-loaded MEs had superior dermal delivery of ITZ than oil-in-water (o/w) ITZ-loaded ME and ITZ-oily solution. Moreover, w/o ITZ-loaded MEs showed larger inhibition zones against C. albicans and T. rubrum than a commercial gel. Therefore, w/o ITZ-loaded MEs possibly provided effective dermal delivery and antifungal activity to treat superficial fungal infections.