Evaluating the Mechanical Response of Agarose-Xanthan Mixture Gels Using Tensile Testing, Numerical Simulation, and a...

Large deformation stress response characteristics of hydrocolloid mixture gel systems were investigated based on texture and rheological measurements. Agarose and xanthan mixtures at different ratios (1:0, 0.75:0.25, and 0.5:0.5) were chosen as the model systems. A decrease in failure stress from 2.65 to 1.82 MPa and an increase in failure strain from 0.08 to 0.13 with higher xanthan ratios were obtained based on the ring tensile test, indicating that xanthan molecules could improve the flexibility of the agarose network. The gels showed severe water loss by compression, particularly for the pure agarose gel (6.74%). Compared to the compression test, the gels presented low water loss after the ring tensile test (<1.3%) indicating that the ring tensile test could calculate the correct stress−strain relationship. Digital image correlation (DIC) and numerical simulation revealed that agarose-xanthan gel systems possess a deformation behavior with homogeneous strain distribution before failure. Elastic and viscous Lissajous−Bowditch curves from the large amplitude oscillatory shear (LAOS) measurement at different strains and frequencies elucidated that the agarose-xanthan gel was dominated by the agarose structure with a similar magnitude of elasticity at a low frequency. The large deformation approach from this study has great potential for elucidating and understanding the structure of food and biopolymer gels.