State of Charge Estimation and Evaluation of Lithium Battery Using Kalman Filter Algorithms
Longzhou Hu1, Rong Hu1, Zengsheng Ma1
1School of Materials Science and Engineering, Xiangtan University, Xiangtan 411105, China.
Abstract:
The accurate and rapid estimation of the state of charge (SOC) is important and difficult in lithium battery management systems. In this paper, an adaptive infinite Kalman filter (AUKF) was used to estimate the state of charge for a 18650 LiNiMnCoO2/graphite lithium-ion battery, and its performance was systematically evaluated under large initial errors, wide temperature ranges, and different drive cycles. In addition, three other Kalman filter algorithms on the predicted SOC of LIB were compared under different work conditions, and the accuracy and convergence time of different models were compared. The results showed that the convergence time of the AUKF algorithms was one order of magnitude smaller than that of the other three methods, and the mean absolute error was only less than 50% of the other methods. The present work can be used to help other researchers select an appropriate strategy for the SOC online estimation of lithium-ion cells under different applicable conditions.
More Related Videos
10:41Three-electrode Coin Cell Preparation and Electrodeposition Analytics for Lithium-ion Batteries
Published on: May 22, 2018
10:36Author Spotlight: Optimization of Airflow Velocities in Battery Cooling Systems for Enhanced Thermal Performance and Reduced Energy Consumption
Published on: November 3, 2023
Related Concept Videos
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Coulometry: Overview
Electrogravimetric Analysis: Overview
To test the completeness of the...
State Space Representation
Consider an RLC circuit, a...
Controlled-Current Coulometry: Overview
Energy Stored in a Capacitor: Problem Solving
Capacitor-discharge ignition is a type of ignition system commonly found in small engines where the energy released from a capacitor ignites an induction coil that, in turn, fires the spark plug.
To calculate the energy stored in a capacitor of...
