Related Experiment Video
Updated: Aug 16, 2025

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
Effect of Non-Woven Polyethylene Terephthalate (PET) Tissue on Fresh and Hardened Properties of Concrete
Sifatullah Bahij1,2, Safiullah Omary1, Vincent Steiner1
1ICube, UMR CNRS 7357, INSA-Strasbourg, 24 Bld de la Victoire, University of Strasbourg, 67084 Strasbourg, France.
Abstract:
This study will investigate the effect of non-woven PET plastic tissue on the fresh, physical, mechanical, acoustic, thermal, and microstructural behaviors of concrete. Including reference specimens, non-woven fabrics were considered in two ways: (a) as a layer with four various configurations of 1-layer, 2-sides, 3-sides, and full wrapping (4-sides) to strengthen specimens, and (b) as (10 × 10) mm cut pieces with three different incorporated percentages of 0.25%, 0.50%, and 0.75%. Based on the experimental results, mechanical properties (compressive, split tensile, and flexural strengths) were remarkably improved by applying non-woven sheets as a layer. For instance, the cylindrical compressive and split tensile strengths were improved by 13.40% and 15.12% for the strengthened specimens compared to the reference specimens, respectively. Moreover, control specimens were damaged to many fragments after mechanical testing, but the samples strengthened by such fabrics or containing cut pieces were maintained and not separated into many small parts. The acoustic behavior and thermal conductivity declined by 9.83% and 19.67% with the attachment of tissue on one side and 2-sides, respectively. Acoustic behaviors decreased by 10.0%, 17.60%, and 26.30% and thermal conductivity decreased by 6.60%, 12.10%, and 15.50%, with the incorporation of 0.25%, 0.50%, and 0.75% of cut pieces, respectively. Finally, it was discovered that non-woven tissue is advised to enhance particular properties of concrete.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Fiber Reinforced Concrete
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Permeability of Concrete
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Relation Between Tensile Strength and Compressive Strength of Concrete

