Related Experiment Video
Updated: Aug 16, 2025

Fabrication of a Bioactive, PCL-based "Self-fitting" Shape Memory Polymer Scaffold
Published on: October 23, 2015
Trans-Polyisoprene/Poly (Ethylene-co-Vinyl Acetate) Polymer Composites as High-Performance Triple Shape Memory
Hua Xin1,2,3, Yangfan Li3, Qi Peng3
1College of Chemistry and Chemical Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
Abstract:
The performance and programming conditions of the triple shape memory of crosslinked trans-polyisoprene/poly (ethylene-co-vinyl acetate) (TPI/EVA) composites with different contents of dicumyl peroxide (DCP) were investigated. The effect of triple shape memory in the TPI/EVA composites was studied by tensile loading, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and dynamic thermomechanical analysis (DMA). It was demonstrated that the content of DCP increased, the crystallization temperature of TPI decreased from 55.2 to 38.3 °C, and the crystallization temperature of EVA decreased slightly. The SEM results showed that DCP, as an initiator, could form a graft copolymer of TPI-g-EVA at the interface of the two phases, which could improve the adhesion of the two phases. The DMA showed that the higher the content of DCP, the higher the first-stage shape recovery ratio. Moreover, the composites exhibited favorable shape fixity ratio (Rf) and shape recovery ratio (Rr) with the incorporation of 0.4 phr DCP. At the same time, it was demonstrated that the TPI/EVA composites showed excellent mechanical strength, including tensile strength up to 24.3 MPa, as well as elongation at break reaching 508%.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Polymer Classification: Architecture
Polymer Classification: Stereospecificity
Olefin Metathesis Polymerization: Ring-Opening Metathesis Polymerization (ROMP)
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Olefin Metathesis Polymerization: Overview
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...

