Related Experiment Video
Updated: Aug 16, 2025

Measurements of Local Instantaneous Convective Heat Transfer in a Pipe - Single and Two-phase Flow
Published on: April 30, 2018
Convective heat transfer coefficient relating to evaluation of thermal environment of infant
Yoshihito Kurazumi1, Kenta Fukagawa2, Tomonori Sakoi3
1School of Life Studies, Sugiyama Jogakuen University, Nagoya, Japan.
Abstract:
Infants have a low capacity to thermally adapt to their environment and so sufficient consideration must be given to their thermal environment. In investigating an infant's thermal environment, the purpose of this study is to clarify the heat transfer coefficient in natural convection for the posture of an infant in a stroller. The heat transfer coefficients were measured by means of using a thermal manikin. The experimental thermal environment conditions were set for eight cases, at: 16 °C, 18 °C, 20 °C, 22 °C, 24 °C, 26 °C, 28 °C, and 30 °C, and the air and wall surface temperatures were equalized, creating a homogeneous thermal environment. The air velocity (less than 0.2 m/s) and relative humidity (50%RH) were the same for each case. The surface temperature of each part of the thermal manikin was controlled to 34 °C. The difference between the mean surface temperature and air temperature (ΔT [K]) is the driving force for the heat transfer coefficient in natural convection for the posture of an infant in a stroller (hc [W/(m2·K)]). We propose the use of the empirical formula hc = 2.16 ΔT 0 .23. The formula of the convective heat transfer coefficient in natural convection of this study can be applied to infants up to about 3 years old.
Related Concept Videos
Conduction, Convection and Radiation: Problem Solving
In order to solve a problem related to heat transfer, first of all, the situation needs to be examined to determine the type of heat transfer involved. This could...
Mechanisms of Heat Transfer II
Mechanism of heat transfer
Assessing Body Temperature - Axilla
Step 1: Perform hand hygiene and put on clean gloves to maintain infection control and prevent cross-contamination.
Step 2: Prepare the patient by explaining the procedure to ensure understanding and cooperation. Ensure privacy, expose the axilla, and inform the patient that minimal movement is crucial for an accurate reading.
Step 3: Adjust the patient’s clothing to expose only the axilla. It minimizes...
Assessing Body Temperature - Rectal
Follow these steps for rectal temperature assessment:
Step 1: Perform hand hygiene and don clean gloves to prevent cross-infection.
Step 2: Position the patient in a side-lying position to better visualize the rectal...
Quantifying Heat

