Related Experiment Video

Updated: Aug 16, 2025

Blast Quantification Using Hopkinson Pressure Bars
09:41

Blast Quantification Using Hopkinson Pressure Bars

Published on: July 5, 2016

9.1K

Electromagnetic induction for reinforced concrete bursting: principles, simulations, experiments, and applications

Min Wang, Zhan Wang, Zhaojun Chen

    Optics Letters
    |December 23, 2022
    PubMed

    More Related Videos

    Determination of the Mechanical Properties of Flexible Connectors for Use in Insulated Concrete Wall Panels05:26

    Determination of the Mechanical Properties of Flexible Connectors for Use in Insulated Concrete Wall Panels

    Published on: October 19, 2022

    1.7K
    Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior11:07

    Preparation of Aligned Steel Fiber Reinforced Cementitious Composite and Its Flexural Behavior

    Published on: June 27, 2018

    11.2K

    Related Concept Videos

    Reinforcements in Concrete01:25

    Reinforcements in Concrete

    Reinforced concrete is a composite material used extensively in construction, combining the compressive strength of concrete with the tensile strength of steel. This synergy is essential as concrete, while excellent at resisting compression, is weak under tension. Steel bars, or rebars, are embedded in the concrete to handle these tensile forces. The choice of steel is strategic; it shares a similar coefficient of thermal expansion with concrete, which ensures uniformity in response to...
    136
    Microcracking in Concrete01:20

    Microcracking in Concrete

    Microcracking in concrete refers to the tiny cracks that can form within the material even before any external load is applied. These microcracks typically occur at the interface between the coarse aggregate and the hydrated cement paste, often as a result of differential volume changes prompted by variations in stress-strain behavior, as well as thermal and moisture movement. Initially, these microcracks remain stable and do not grow substantially until the concrete is stressed to about 30...
    175
    Reinforced Brick Masonry01:15

    Reinforced Brick Masonry

    Reinforced brick masonry is an advanced construction technique that enhances the structural integrity of brick walls by incorporating steel reinforcements. These reinforcements are either placed within the hollow cores of bricks or sandwiched between two layers of masonry, known as wythes, and are then secured in place with grout. Grout is a fluid mixture composed of Portland cement, aggregate, and water, providing the necessary bonding agent for the steel and brick.
    To fortify brick walls...
    1.2K
    Design Example: Distributing Reinforcements in Concrete Sections01:22

    Design Example: Distributing Reinforcements in Concrete Sections

    The topic explores the practical aspects of adjusting steel reinforcements within a concrete beam section to meet specific design requirements. When designing a reinforced concrete beam, it is essential to distribute the steel reinforcements properly to ensure structural integrity and efficiency. The example provided details a scenario where a beam requires a total steel cross-section of 4 square inches. The engineer identifies that the available steel bars have a nominal diameter of 1.693...
    124
    Non-destructive Tests for Concrete Strength01:12

    Non-destructive Tests for Concrete Strength

    The rebound hammer test, also known as the Schmidt hammer test, is a non-destructive technique for evaluating the hardness of concrete and, indirectly, the strength of concrete. It operates on the principle that the rebound of a spring-driven mass from a concrete surface correlates to the surface's hardness. The device comprises a mass within a tubular housing, a spring mechanism, and a plunger that strikes the concrete. Upon release, the energy imparted to the mass by the spring causes it...
    169
    Fiber Reinforced Concrete01:22

    Fiber Reinforced Concrete

    Fiber-reinforced concrete significantly enhances the structural and nonstructural properties of traditional concrete by incorporating fibers like steel, glass, and polymers. These fibers, varying from natural ones such as sisal and cellulose to manufactured ones like polypropylene and Kevlar, are mixed into hydraulic cement with aggregates. Steel fibers, often preferred for their robustness, contribute to improved ductility, toughness, and post-cracking performance. The concrete is classified...
    116