Preparation of Al-Si alloy from silicon cutting waste: Enabling oxide surface removing and silicon utilization...

Environmentally harmful silicon cutting waste (SCW) generated during the production of silicon solar cells possesses a high reuse value. However, the presence of oxide surface and impurities restrict the Si-cores reuse. Herein, inspired by the structure and composition of SCW, designed a combined process consisting of vacuum sintering and alloying to reuse SCW into Al-Si alloy at a low cost. Vacuum sintering promotes the reduction of the oxide surface by Si-core. Oxygen content was decreased by 92.54 %, demonstrating the successful removal of the oxide surface. The discharge of reduction products contributes to the densification, and the Si-core has converged into dense Vac-ceramic (Si block), rendering a relative density of 96.17 %. More importantly, during the alloying process, the formation of Vac-ceramic dredges the mass transfer pathway from Si-core to Al melt. As a result, the Si utilization rate increased about seven times compared with the direct reuse of pristine SCW. Compared with commercial Al-Si alloys, the Al-Si alloys prepared by reusing silicon cutting waste in this work have satisfactory mechanical properties. The method has the prominent advantages of being protective-atmosphere-free, additive-free, and scalability, and may be a promising candidate for the silicon cutting waste purifying and reusing field.