Related Experiment Video
Updated: Aug 16, 2025

Thermocapillary Convection Space Experiment on the SJ-10 Recoverable Satellite
Published on: March 11, 2020
High moisture confluence in Japan Sea polar air mass convergence zone captured by hourly radiosonde launches from a
Yoshihiro Tachibana1, Meiji Honda2, Hatsumi Nishikawa3
1Faculty of Bioresources, Mie University, Tsu, Japan. tachi@bio.mie-u.ac.jp.
Abstract:
Some of the heaviest snowfalls in urban areas in the world occur in Japan, particularly in regions that face the Japan Sea. Many heavy snowfalls are produced by a Japan Sea polar air mass convergence zone (JPCZ), which is an atmospheric river-like cloud zone that forms when Siberian cold air flows over the warm Japan Sea. Quantifying how the air-sea interaction strengthens the JPCZ is key to snowfall prediction. However, until our observations with hourly meteorological balloon launches from a training vessel in 2022, no simultaneous air-sea observations targeting the JPCZ had been conducted. Our observations showed that wind direction shifted drastically by about 90 degrees from the surface to an altitude of about 3.5 km within a narrow horizontal range of about 15 km, indicating airflow convergence from the surroundings. Maximum temperature difference between surface air (3 °C) and water was 11 °C near the JPCZ centre with 17 m s-1 wind speed. Large amounts of heat, 718 W m-2, was thus gained from the warm sea. Water vapour was also concentrated by the horizontal convergence, which caused heavy snow, equivalent to 100 cm of snowfall in 7 h. The surrounding sea greatly affects moisture formation within the JPCZ.
Related Concept Videos
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Precipitation and Co-precipitation
Measurement of Air Content in Concrete
The pressure method,...
Precipitation Processes
Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...
Boundary Layer Characteristics

