Related Experiment Video
Updated: Aug 15, 2025

In Situ Transmission Electron Microscopy with Biasing and Fabrication of Asymmetric Crossbars Based on Mixed-Phased a-VOx
Published on: May 13, 2020
Novel ternary organic resistive switching memory doped with bipolar materials
Haoyang Li1, Weixia Lan1,2, Xian Wu1
1School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, People's Republic of China.
Abstract:
Organic resistive switching memory (ORSM) shows great potential for neotype memory devices due to the preponderances of simple architecture, low power consumption, high switching speed and feasibility of large-area fabrication. Herein, solution-processed ternary ORSM devices doped with bipolar materials were achieved with high ON/OFF ratio and outstanding device stability. The resistive switching performance was effectively ameliorated by doping two bipolar materials (DpAn-InAc and DpAn-5BzAc) in different blending concentration into the PVK:OXD-7 donor-accepter system. Compared with the binary system (PVK: 30 wt% OXD-7), the ON/OFF ratios of the ternary devices doped with 6 wt% DpAn-5BzAc were greatly increased from 7.91 × 102to 4.98 × 104, with the operating voltage (∣Vset-Vreset∣) declined from 4.90 V to 2.25 V, respectively. Additionally, the stability of resistance state and uniformity of operating voltage were also significantly optimized for the ternary devices. For comparison, ternary devices doped with DpAn-InAc have been explored, which also achieved improved resistive switching behavior. A detailed analysis of electrical characteristics and the internal charge transfer properties of ORSM was performed to unveil the performance enhancement in ternary devices. Results indicate that the use of bipolar materials favors the efficient operation of OSRMs with proper energy level alignment and effective charge transfer.
More Related Videos
Related Concept Videos
Bipolar Junction Transistor
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Switching of BJT
Cut-off Mode ("Off" State): In this state, both the emitter-base and collector-base junctions are...
Schottky Barrier Diode

