Related Experiment Video
Updated: Aug 15, 2025

Generation and Coherent Control of Pulsed Quantum Frequency Combs
Published on: June 8, 2018
Analog stabilization of an electro-optic I/Q modulator with an auxiliary modulation tone
Abstract:
Proper operation of electro-optic I/Q modulators relies on precise adjustment and control of the relative phase biases between the modulator's internal interferometer arms. We present an all-analog phase bias locking scheme where error signals are obtained from the beat between the optical carrier and optical tones generated by an auxiliary 2 MHz R F tone to lock the phases of all three involved interferometers for operation up to 10 GHz. With the developed method, we demonstrate an I/Q modulator in carrier-suppressed single-sideband mode, where the suppressed carrier and sideband are locked at optical power levels <-27d B relative to the transmitted sideband. We describe a simple analytical model for calculating the error signals and detail the implementation of the electronic circuitry for the implementation of the method.
Related Concept Videos
Inverting and Non-inverting OpAmps
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
Power Factor Correction
Operational Amplifiers
Instrumentation Amplifier
To overcome this challenge, an ECG machine utilizes an instrumentation amplifier. This specialized amplifier is...
Sum and Difference OpAmps
A summing amplifier, or an adder, utilizes an op-amp to merge multiple input signals into a single output signal. When audio signals are introduced into its input channels, the input resistors initiate currents that traverse feedback resistors, resulting in an output voltage. Applying Kirchhoff's...

