Poly(ethylene glycol)-Norbornene as a Photoclick Bioink for Digital Light Processing 3D Bioprinting

Digital light processing (DLP) bioprinting is an emerging technology for three-dimensional bioprinting (3DBP) owing to its high printing fidelity, fast fabrication speed, and higher printing resolution. Low-viscosity bioinks such as poly(ethylene glycol) diacrylate (PEGDA) are commonly used for DLP-based bioprinting. However, the cross-linking of PEGDA proceeds via chain-growth photopolymerization that displays significant heterogeneity in cross-linking density. In contrast, step-growth thiol-norbornene photopolymerization is not oxygen inhibited and produces hydrogels with an ideal network structure. The high cytocompatibility and rapid gelation of thiol-norbornene photopolymerization have lent itself to the cross-linking of cell-laden hydrogels but have not been extensively used for DLP bioprinting. In this study, we explored eight-arm PEG-norbornene (PEG8NB) as a bioink/resin for visible light-initiated DLP-based 3DBP. The PEG8NB-based DLP resin showed high printing fidelity and cytocompatibility even without the use of any bioactive motifs and high initial stiffness. In addition, we demonstrated the versatility of the PEGNB resin by printing solid structures as cell culture devices, hollow channels for endothelialization, and microwells for generating cell spheroids. This work not only expands the selection of bioinks for DLP-based 3DBP but also provides a platform for dynamic modification of the bioprinted constructs.