Related Experiment Video
Updated: Aug 15, 2025

The Effect of Construction and Demolition Waste Plastic Fractions on Wood-Polymer Composite Properties
Published on: June 7, 2020
Material Analysis of the Remains of a Wooden Chest from the 4th Century and a Proposal for Its Reconstruction
Rebeka Rudolf1, Janez Slapnik2, Rajko Bobovnik2
1Faculty of Mechanical Engineering, University of Maribor, Smetanova ulica 17, 2000 Maribor, Slovenia.
Abstract:
A stone chest found in 1971 near one of the largest early Christian basilicas in Northern Dalmatia (Croatia) contained brass tiles decorated with various biblical scenes. An archaeological study confirmed the thesis that the fragments of brass tiles are most likely the remains of a wooden chest made in the 4th century AD, and that this is one of the best preserved archaeological finds of its kind in the world as one of the biblical scenes shows Mary, together with a record of her name (Maria). Based on the preserved brass tiles, a reconstruction of the wooden chest was made in 1973 with tiles glued onto a plastic frame. Subsequent studies have shown that such a reconstruction was not adequate, as some of the brass tiles were destroyed (disintegrated), and they were not connected properly into a whole that could represent the original. For the new reconstruction of this archaeological object it was necessary to carry out a material analysis, including the chemical composition of the brass tiles, as well as to find a solvent for the glue which could be used to remove the brass tiles from the plastic framework without any additional destruction. Based on extensive investigations and material analyses including the following techniques (SEM, EDX, FTIR, DSC), the starting points for the restoration process of the wooden chest with brass tiles were set, as well as the proposal for the appearance of the new chest.
Related Concept Videos
Introduction to Wood
The structural integrity of the...
Structural Properties and Dimensions of Lumber
The strength characteristics of...
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...
Lumber Defects
Shakes are minor fractures that run along or across the wood's annual rings, while wane is...
Wood Fasteners
Nails are the most common fasteners, consisting of sharp-pointed metal pins that are driven into wood using a hammer or a mechanical nail gun. They come in a variety of diameters, heads, and lengths. Nailing techniques include...

