Development and Implementation of Element Deletion Algorithm into an Open-Source Software Based on the Fracture Locus...

An accurate fracture simulation is often associated with how reliably the material model is represented. Hence, many models dealing with the calibration of ductile damage of materials have already been developed to predict failure initiation. Nevertheless, the challenge remains in obtaining an accurate representation of the fracture growth. Herein, an element deletion algorithm is developed and implemented into finite element open-source software. The deleted elements are replaced by new cells made of a virtual low-stiffness material. To better visualize the failure progression, the final model excludes these virtual cells from the representation. The functionality of the algorithm is tested through a series of two-dimensional simulations on three different geometries with a well-known behavior under uniaxial tension. Moreover, the failure response of a three-dimensional lattice structure is numerically investigated and compared against experimental data. The results of the two-dimensional simulations showed the capability of the algorithm to predict the onset of failure, crack nucleation, and fracture growth. Similarly, the onset and the initial fracture region were accurately captured in the three-dimensional case, with some convergence issues that prevent the visualization of the fracture growth. Overall, the results are encouraging, and the algorithm can be improved to introduce other computational functionalities.