Related Experiment Video
Updated: Aug 15, 2025

Analyzing the Photo-oxidation of 2-propanol at Indoor Air Level Concentrations Using Field Asymmetric Ion Mobility Spectrometry
Published on: June 14, 2018
Influence of Different Environments and Temperatures on the Photo-Oxidation Behaviour of the Polypropylene
Francesco Paolo La Mantia1,2, Marilena Baiamonte2, Stefania Santangelo2
1Department of Engineering, Università di Palermo, Viale delle Scienze, 90128 Palermo, Italy.
Abstract:
The photo-oxidation of polypropylene at two different temperatures and in three different environments-air, distilled water and sea water-has been followed as a function of the irradiation time. The photo-oxidation kinetic is dramatically dependent on the amount of oxygen available for the oxidation reactions and on the temperature. While the photo-oxidation is very fast in air, the degradation is much slower in the two aqueous media. The degradation in sea water is slightly slower than in distilled water. In all cases, the degradation kinetic increases remarkably with the temperature. This behavior has been attributed to the lower oxygen availability for the oxidation reactions of the polymers. The light difference of the degradation kinetic between the two aqueous media depends on the small difference of the oxygen concentration at the test temperatures of 40 and 70 °C. At the latter temperature, the difference between the degradation kinetic in distilled water and sea water is still less important because increasing the temperature decreases the solubility of the oxygen, and it tends to became very similar in both samples of water.
Related Concept Videos
Free-Radical Chain Reaction and Polymerization of Alkenes
Polymer Classification: Stereospecificity
Radical Autoxidation
Photochemical Electrocyclic Reactions: Stereochemistry
Selection Rules: Photochemical Activation
Cycloaddition Reactions: MO Requirements for Photochemical Activation
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...

