Related Experiment Video
Updated: Aug 15, 2025

Advanced Self-Healing Asphalt Reinforced by Graphene Structures: An Atomistic Insight
Published on: May 31, 2022
Self-Healing Performance of Asphalt Concrete with Ca-Alginate Capsules under Low Service Temperature Conditions
Huoming Wang1, Quantao Liu2, Jie Wu1
1National Engineering and Research Center for Mountainous Highways, China Merchants Chongqing Communications Technology Research and Design Institute Co., Ltd., Chongqing 400067, China.
Abstract:
Calcium alginate capsules containing rejuvenators represent a promising method for asphalt concrete premaintenance, but their healing capacities under lower temperature conditions are still unknown. This paper investigated the healing performance of asphalt concrete containing calcium alginate capsules at low service temperatures. The Ca-alginate capsules were synthesized, and their morphology, compressive strength, thermal resistance, and relative oil content were evaluated. Besides, evaluations for the healing of asphalt concrete and the rejuvenator-release ratio of the capsules were determined via fracture-healing-refracture testing and Fourier-transform infrared spectrum experiments. Meanwhile, the glass transition temperature and rheological property of asphalt binder after compressive loading under different temperatures were explored via a differential scanning calorimeter and dynamic shear rheometer. The results showed that the capsules had good thermal resistance and mechanical strength. The capsules released less oil under -15, -10, and -5 °C than at 20 °C, and the healing ratios of the asphalt concrete with the capsules at -15, -10, and -5 °C were obviously lower than that at 20 °C. The released rejuvenator from the capsules could decrease the complex modulus and glass transition temperature of the asphalt binder. When compared with low service temperatures, the asphalt binder containing the capsules and serving at a high temperature has a better softening effect and low-temperature performance due to more oil being released.
More Related Videos
12:22Synthesis of Thermogelling PolyN-isopropylacrylamide-graft-chondroitin Sulfate Composites with Alginate Microparticles for Tissue Engineering
Published on: October 26, 2016
09:37Fabrication of a Bioactive, PCL-based "Self-fitting" Shape Memory Polymer Scaffold
Published on: October 23, 2015
Related Concept Videos
Accelerators
The effectiveness of calcium chloride can...
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Cold Weather Concreting
To counteract the negative impacts of cold weather, ensuring...
Alkali Aggregate Reaction in Concrete
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...
Design Example: Managing Concrete Workability