Related Experiment Video
Updated: Aug 14, 2025

Fabrication of Carbon-Based Ionic Electromechanically Active Soft Actuators
Published on: April 25, 2020
Homogeneous activation induced by bacterial cellulose nanofibers to construct interconnected microporous carbons for
Wanxia Luo1, Nannan Guo2, Luxiang Wang2
1State Key Laboratory of Chemistry and Utilization of Carbon Based Energy Resources, College of Chemistry, Xinjiang University, Urumqi 830017, PR China; The Center for Disease Control and Prevention of Xinjiang Uygur Autonomous Region, Urumqi 830002, PR China.
Abstract:
Porous carbons have been widely applied for capacitive energy storage, yet usually suffer from insufficient rate performance because of the sluggish ion transport kinetics in deep and multi-branched pores. Herein, we fabricated an interconnected microporous capacitive carbon (IMCC) by growing D (+)-glucosamine on bacterial cellulose (BC) nanofibers scaffold, followed by carbonization and activation. The BC nanofibers acted as a sacrificial template during pre-carbonization, facilitating the subsequent KOH permeation and homogeneous activation. By taking advantage of the interconnected microporous structure, the IMCC delivers a high capacitance of 302 F g-1 at 1 A g-1 and an excellent rate capability of 165 F g-1 at 100 A g-1 for aqueous supercapacitor, demonstrating its fast ion transport capability. Impressively, it also shows a superior gravimetric capacity of 177 mAh g-1 at 0.5 A g-1 and remains a high value of 72 mAh g-1 at 20 A g-1 as a cathode material for Zn-ion hybrid capacitor. This facile and cost-effective design strategy exhibits a great potential to construct carbohydrates-derived interconnected microporous carbon materials for high-rate energy storage.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
09:20Microhoneycomb Monoliths Prepared by the Unidirectional Freeze-drying of Cellulose Nanofiber Based Sols: Method and Extensions
Published on: May 24, 2018
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Capacitor With A Dielectric
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...