An Overview of Factors Affecting Exposure Level in Digital Detector Systems and their Relevance in Constructing...

The aim of this review is to describe the steps of constructing exposure tables for use of digital detector systems (DRx) in equine practice. Introductory, selected underlying technical aspects of digital radiography are illustrated. Unlike screen-film radiography (SFR), DRx have a uniform signal response of the detector over a large dose range. This enables generation of diagnostic images from exposures that were previously nondiagnostic on SFR, thus reducing retakes. However, with decreasing detector entrance dose, image noise increasingly hampers the image quality. Conversely, unlike the blackening observed on SFR, overexposures can go visibly undetected by the observer. In DRx the numeric exposure indicator value is the only dose-control tool. In digital radiography the challenge is to reduce the dose and reduce the radiation risk to staff whilst maintaining diagnostic image quality. We provide a stepwise method of developing exposure tables as tools for controlling exposure levels. The identified kVp - mAs combinations in the table are derived from the predefined exposure indicator values of the detector system. Further recommendations are given as to how the exposure indicator can be integrated into routine workflow for rechecking the reliability of the formerly identified settings and how these tables might serve a basis for further reduction of the exposure level. Detector quantum efficiency (DQE) is an important parameter of assessing performance of an imaging system. Detectors with higher DQE can generate diagnostic images with a lower dose, thus having a greater potential for dose reduction than detectors with low DQE.