Three-dimensional reduced graphene reinforced cement with enhanced safety and durability for drinking water...

Cement mortar lining (CML) is commonly used for iron pipe internal corrosion inhibition in drinking water distribution system (DWDS), however, the corrosion of CML itself is still a problem, particularly under soft water conditions. In this study, both long-term experimental study and theoretical studies were conducted to evaluate the effects of graphene oxide (GO) and three-dimensional reduced graphene oxide (3D-rGO) as additives on the stability of CML and the corresponding water quality. Results showed that during a 182-day leaching experiment, the 3D-rGO modified cement had a higher ability to inhibit the cement constituent leaching than GO modified and original cements. Structural characterization indicated that the addition of 3D-rGO could slightly promote the degree of calcium hydroxide crystallization in CML. Molecular dynamics simulation demonstrated that the 3D-rGO nanosheets strengthened the tensile strain of the cement and restricted the movement of calcium ions by forming strong bonds with the calcium-silicate-hydrate gel network. In addition, compared with GO modified cement and original cement, the 3D-rGO modified cement could somewhat reduce the disinfection by-products formation and the microbial richness in drinking water. Thus, the reinforcement of cement by 3D-rGO could enhance the safety and durability of CML iron pipes in DWDS.