Asymmetric Low-Frequency Pulsed Strategy Enables Ultralong CO₂ Reduction Stability and Controllable Product...

Copper-based catalysts are widely explored in electrochemical CO₂ reduction (CO₂RR) because of their ability to convert CO₂ into high-value-added multicarbon products. However, the poor stability and low selectivity limit the practical applications of these catalysts. Here, we proposed a simple and efficient asymmetric low-frequency pulsed strategy (ALPS) to significantly enhance the stability and the selectivity of the Cu-dimethylpyrazole complex Cu₃(DMPz)₃ catalyst in CO₂RR. Under traditional potentiostatic conditions, Cu₃(DMPz)₃ exhibited poor CO₂RR performance with the Faradaic efficiency (FE) of 34.5% for C₂H₄ and FE of 5.9% for CH₄ as well as the low stability for less than 1 h. We optimized two distinguished ALPS methods toward CH₄ and C₂H₄, correspondingly. The high selectivities of catalytic product CH₄ (FE_CH4 = 80.3% and above 76.6% within 24 h) and C₂H₄ (FE_C2H4 = 70.7% and above 66.8% within 24 h) can be obtained, respectively. The ultralong stability for 300 h (FE_CH4 > 60%) and 145 h (FE_C2H4 > 50%) was also recorded with the ALPS method. Microscopy (HRTEM, SAED, and HAADF) measurements revealed that the ALPS method in situ generated and stabilized extremely dispersive and active Cu-based clusters (∼2.7 nm) from Cu₃(DMPz)₃. Meanwhile, ex situ spectroscopies (XPS, AES, and XANES) and in situ XANES indicated that this ALPS method modulated the Cu oxidation states, such as Cu(0 and I) with C₂H₄ selectivity and Cu(I and II) with CH₄ selectivity. The mechanism under the ALPS methods was explored by in situ ATR-FTIR, in situ Raman, and DFT computation. The ALPS methods provide a new opportunity to boost the selectivity and stability of CO₂RR.