Related Experiment Video
Updated: Aug 14, 2025

Spatial Multiobjective Optimization of Agricultural Conservation Practices using a SWAT Model and an Evolutionary Algorithm
Published on: December 9, 2012
Multi objective simulation-optimization operation of dam reservoir in low water regions based on hedging principles
Sedighe Mansouri1, Hossein Fathian2, Alireza Nikbakht Shahbazi1
1Department of Water Resources Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran.
Abstract:
The high level of reliability of water resources is always an advantage for consumers, but in arid and semi-arid regions where the inflow to the reservoir is faced with severe fluctuations, it makes sense to decrease the percentage of reliability of the system and allocate less water to consumption zones to prevent critical conditions such as emptying of the reservoir. In this research, the employed operation model is based on the simulation-optimization combination by considering the objectives of minimizing the violation of the allowed capacity of the reservoir and maximizing the percentage of supplying the demands. The optimal hedging variables are specified by linking the WEAP (Water Evaluation and Planning System) to the MOPSO multi-objective optimization algorithm. According to the available data, the duration of the simulation and optimization period in the model is 360 months. After 1000 iterations, the optimal reservoir volume values are obtained at the hedging level and hedging coefficient in different months. Finally, the model results are compared with the results obtained from the standard operation policy (SOP). The results show that the proposed model is able to manage the allocation to needs in the dry months and prevent the reservoir from emptying. Also, by storing a part of the flow in the reservoir in watery months and consuming it in low water months, it increases the supply of needs by 20 to 35% and reduces the failure rate in dry months.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Design Example: Creating a Hydraulic Model of a Dam Spillway
Modeling and Similitude
Design Example: Maintaining Level of an Embankment
Typical Model Studies
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...

