Elman Neural Network-Based Direct Lift Automatic Carrier Landing Nonsingular Terminal Sliding Mode Fault-Tolerant
Qilong Wu1, Qidan Zhu1, Shuai Han1
1College of Intelligent Systems Science and Engineering, Harbin Engineering University, Harbin, Heilongjiang 150001, China.
Abstract:
The purpose of this paper is to develop the control system using the Elman neural network (ENN) and nonsingular terminal sliding mode control (NTSMC) to improve the automatic landing capability of carrier-based aircraft based on direct lift control (DLC) when subjected to carrier air-wake disturbance and actuator failure. First, the carrier-based aircraft landing model is derived. Then, the NTSMC is proposed to ensure the system's robustness and achieve accurate trajectory tracking performance in a finite time. Due to the inclusion of nonsingularity in NTSMC, the steady-state response of the control system can be effectively improved. In addition, the ENN is derived using an adaptive learning algorithm to approximate the actuator faults and system uncertainties. To further ensure the accurate tracking of the ideal glide path by the carrier-based aircraft, the NTSMC system using an ENN estimator is proposed. Finally, this method is tested by adding different types of actuator failures. The simulation results show that the designed longitudinal fault-tolerant carrier landing system has strong robustness and fault-tolerant ability and improves the accuracy of carrier-based aircraft landing trajectory tracking.
More Related Videos
11:53The Modular Design and Production of an Intelligent Robot Based on a Closed-Loop Control Strategy
Published on: October 14, 2017
11:16Engineering Platform and Experimental Protocol for Design and Evaluation of a Neurally-controlled Powered Transfemoral Prosthesis
Published on: July 22, 2014
Related Concept Videos
Multi-input and Multi-variable systems
In the absence...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Load-frequency control
Control Systems
At the heart...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
