Supportless Lattice Structures for Energy Absorption Fabricated by Fused Deposition Modeling

Additively manufactured cellular structures represent a promising engineering design concept for making customized products where user-specific mechanical properties are required. One of the major challenges in the additive manufacturing (AM) process is removal of unwanted support structures from the lattice. The support structure consumes extra material, printing time, and energy for manufacturing. Postprinting, it needs extensive postprocessing work to remove it from the lattice structure chemically or mechanically. In the case of flexible materials such as thermoplastic polyurethane (TPU), removing the support structure from the lattice is very difficult with the material extrusion process. In this article, a new type of a shell-shaped lattice structure inspired by sea urchin (SU) morphology is designed. This lattice can be additively manufactured by material extrusion processes such as fused deposition modeling (FDM) without requiring any support structures. The mechanical properties of the proposed structure, such as stiffness and energy absorption during loading and unloading, have been evaluated as they are important for cushioning. The compressive results indicate that the stiffness property is almost twice as high compared with the benchmarked, bending-dominated, body-centered cubic (BCC) lattice structure of the same relative density and ethylene vinyl acetate (EVA) foam. Energy absorption is almost equal to the BCC lattice and 20% better than EVA foam. Last, a predictive model on stiffness behavior and energy return was developed to facilitate a systematic way to select optimal densities of the SU lattice structure for energy-absorbing applications. Visual inspection has also revealed that there is no sagging or failure of the lattice, which reduced the manufacturing time and postprocessing time, saving a significant amount of material without compromising on quality. Supportless lattice printing was also validated by printing the specimen with a different FDM printer and TPU filament. A possible application for supportless lattice structures can be for AM of customized shoe midsoles at low cost, ski boots, tires, automotive crush boxes, or any other energy-absorbing structures.