Related Experiment Video
Updated: Aug 13, 2025

Synthesis of Ionic Liquid Based Electrolytes, Assembly of Li-ion Batteries, and Measurements of Performance at High Temperature
Published on: December 20, 2016
Improved Cycling of Li||NMC811 Batteries under Practical Conditions by a Localized High-Concentration Electrolyte
Feng Guo1, Xi Chen2, Yuhan Hou3,4
1Zhejiang CHINT Electrics Co., Ltd. , Shanghai, 201600, P. R. China.
Abstract:
Li||NMC811 battery, with lithium-metal (high specific capacity and low redox potential) as anode and LiNi0.8 Co0.1 Mn0.1 O2 (NMC811) as cathode, has been widely accepted to be a good candidate as one of the high-energy-density batteries. However, its cyclability needs improvement to fulfill the requirement for its future commercial use, especially under practical conditions. Electrolyte plays a key role in improving the cycling performance of Li||NMC811 batteries, where a high voltage/electrochemical window and good stability with the electrodes of the electrolyte are required. Herein, a localized high-concentration electrolyte with an additive of lithium difluoro(oxalate)borate (LiDFOB) is reported that improves the cycling performance of Li||NMC811 cells under crucial conditions with Li foil thickness of 50 µm, cathode areal loading of 4 mAh cm-2 , the areal capacity ratio between the negative and positive electrodes (N/P ratio) of 2.6 and the electrolyte/cell capacity ratio (E/C ratio) of 3.0 g (Ah)-1 . These cells can maintain 80% of the capacity after 195 cycles.
More Related Videos
Related Concept Videos
Batteries and Fuel Cells
Voltaic/Galvanic Cells
Spontaneous redox reactions occur abundantly in nature. The chemical reaction occurring in a disposable AA battery powering our remote controls is one such example of a spontaneous redox reaction. Another example is the immersion of coiled copper wire into an aqueous silver nitrate solution. The reaction shows a gradual, visually impressive color change from colorless to bright blue and the formation of a grey precipitate on the copper wire. In this experiment,...

