Related Experiment Video
Updated: Aug 12, 2025

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
Experimental observations on metal-like carrier transport and Mott hopping conduction behaviours in boron-doped Si
Jiaming Chen1, Dongke Li2, Teng Sun1
1School of Electrical Science and Engineering, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Provincial Key Laboratory of Advanced Photonic and Electrical Materials, Nanjing University, Nanjing, 210000, People's Republic of China.
Abstract:
Studies on the carrier transport characteristics of semiconductor nanomaterials are the important and interesting issues which are helpful for developing the next generation of optoelectronic devices. In this work, we fabricate B-doped Si nanocrystals/SiO2multilayers by plasma enhanced chemical vapor deposition with subsequent high temperature annealing. The electronic transport behaviors are studied via Hall measurements within a wide temperature range (30-660 K). It is found that when the temperature is above 300 K, all the B-doped Si nanocrystals with the size near 4.0 nm exhibit the semiconductor-like conduction characteristics, while the conduction of Si nanocrystals with large size near 7.0 nm transforms from semiconductor-like to metal-like at high B-doping ratios. The critical carrier concentration of conduction transition can reach as high as 2.2 × 1020cm-3, which is significantly higher than that of bulk counterpart and may be even higher for the smaller Si nanocrystals. Meanwhile, the Mott variable-range hopping dominates the carrier transport when the temperature is below 100 K. The localization radius of carriers can be regulated by the B-doping ratios and Si NCs size, which is contributed to the metallic insulator transition.
More Related Videos
Related Concept Videos
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Carrier Transport
Drift Current:
The drift of charge carriers is started by an external electric field (E). Charged particles, such as electrons and holes, experience an acceleration between collisions with lattice atoms. For electrons, this results in a drift velocity (vd) given by:
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Theory of Metallic Conduction
In this theory, Newton's second law of motion is used to determine the acceleration of an electron in the presence of an applied electric field. Then, its velocity is expressed via this acceleration.
An electron moves through the crystal, containing positive ions,...
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
Types of Semiconductors

