Practical Implementation of Emergent After-Hours Radiation Treatment Process Using Remote Treatment Planning on...

The purpose of this report is to present the implementation of a process for after-hours radiation treatment (RT) utilizing remote treatment planning based on optimized diagnostic computed tomography (CT) scans for the urgent palliative treatment of inpatients. A standardized operating procedure was developed by an interprofessional panel to improve the quality of after-hours RT and minimize the risk of treatment errors. A new diagnostic CT protocol was created that could be performed after-hours on hospital scanners and would ensure a reproducible patient position and adequate field of view. An on-call structure for dosimetry staff was created utilizing remote treatment planning. The optimized CT protocol was developed in collaboration with the radiology department, and a novel order set was created in the electronic health system. The clinical workflow begins with the radiation oncologist notifying the on-call team (therapist, dosimetrist, and physicist) and obtaining an optimized diagnostic CT scan on a hospital-based scanner. The dosimetrist remotely creates a plan; the physicist checks the plan; and the patient is treated. Plans are intentionally simple (parallel opposed fields, symmetric jaws) to expedite care and reduce the risk of error. Education on the new process was provided for all relevant staff. Our process was successfully implemented with the use of an optimized CT protocol and remote treatment planning. This approach has the potential to improve the quality and safety of emergent after-hours RT by better approximating the normal process of care.