Related Experiment Video
Updated: Aug 12, 2025

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Hardware-in-the-loop testing of simple and intelligent MPPT control algorithm for an electric vehicle charging power
Mohamed Fawzy El-Khatib1, Mohamed-Nabil Sabry2, Mohamed I Abu El-Sebah3
1Mechatronics and Robotics Engineering Department, Faculty of Engineering, Egyptian Russian University (ERU), Cairo 11829, Egypt; Mechatronics Engineering Department, Faculty of Engineering, Ain Shams University, Cairo 11517, Egypt.
Abstract:
In this paper, an electric vehicle (EV) charging station powered by a photovoltaic (PV) system has been created to charge EVs. Furthermore, the maximum available power from the PV system was extracted using a new algorithm called the simplified universal intelligent PID (SUIPID) controller, which has the advantages of simplicity in design and intelligence. The SUIPID controller was compared to the artificial neural networks (ANNs), the fuzzy logic controller (FLC) based on linear membership functions, and the FLC based on particle swarm optimization (PSO) to optimize its parameters under various conditions. The system simulation was first performed using MATLAB software, then an experimental set up was conducted to confirm the theoretical work. The proposed SUIPID responds 28.5%, 44.4%, and 61.5% faster than the PSO-FLC, ANN, and FLC, respectively, whereas the ITAE error was reduced by 27.3%, 52.9%, and 65.2%, respectively. Also, the charging procedure of the EV battery is precisely steady under different atmospheric conditions. The SUIPID controller has several advantages over other intelligent algorithms, most notably its ease of design and implementation.
More Related Videos
09:00Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass ADG Fresnel Lens for Concentrating Photovoltaics
Published on: October 27, 2017
09:19In Situ Monitoring of the Accelerated Performance Degradation of Solar Cells and Modules: A Case Study for CuIn,GaSe2 Solar Cells
Published on: October 3, 2018
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
PI Controller: Design
Load-frequency control
PID Controller
Maximum Power Flow and Line Loadability
Control of Power Flow