Development of a feeding simulation to evaluate how feeding distribution in aquaculture affects individual...

In this study, we developed a feeding simulation using the fish schooling behavior model to evaluate growth differences from the feeding spatial distribution. In the proposed simulation, feeding behavior was modeled using the fish schooling model to simulate the amount of feed consumed by each individual. Next, body mass growth was calculated based on the amount of feed consumed. A 3.0-m diameter aquaculture tank was used for the simulation. We used three feeding methods to evaluate how feeding distribution affected growth: Feeding A, B, and C. The feed was distributed in a square pattern with one side length of 1.5, 1.0, or 0.5 m for Feeding A, B, and C groups, respectively. The results revealed that individual differences in body mass resulting from each feeding method differed greatly. The individual difference was largest in the Feeding C group. Here, maximum swimming speed was assumed to be proportional to total length. The feeding area of Feeding C was narrow; therefore, the first individual to arrive in the feeding area dominated the feed. Large individuals accessed the feed more easily than did small individuals. Consequently, the growth of large individuals became more rapid, and the individual differences became large in Feeding C. A rearing test can be conducted in a short time, and the optimal aquaculture operation was easily determined using the proposed simulation method. We concluded that the proposed simulation is useful as a decision-making tool for aquaculture management.