Performance and mechanism of GO removal by gypsum from aqueous solution

The widespread production and application of graphene oxide (GO) may lead to its dispersion throughout natural water systems, with potential negative effects on living organisms and the ecological environment. This study used gypsum (G) as an adsorbent and examined different conditions (pH, adsorbent dosage, GO initial concentration) for the removal effect of GO by G. The results showed the best adsorption effect for a solution pH of 8.0, gypsum dosage of 60 mg, initial GO concentration of 80 mg·L^-1, and temperature of 303 K; at this time, the maximum removal rate of graphene oxide by gypsum was 93.3%. It could be obtained by isotherm and thermodynamic analysis that the GO adsorption by gypsum conforms to the Langmuir isotherm model, it does not easily occur in high-temperature environments, and is a spontaneous exothermic process. In addition, experiments such as SEM, AFM, TGA, XRD, XPS, FTIR, Raman, and Zeta were used to adsorb graphene oxide by gypsum composites (G/GO), through which the mineral interactions with graphene oxides were microscopically characterized. The impact on the adsorption properties of contaminants provides new insights into contaminant removal by gypsum.