Hydrochemistry, Sources and Management of Fracturing Flowback Fluid in Tight Sandstone Gasfield in Sulige Gasfield...

Hydraulic fracturing technologies have been frequently utilized in the oil and gas industry as exploration and development efforts have progressed, resulting in a significant increase in the extraction of natural gas and petroleum from low-permeability reservoirs. However, hydraulic fracturing requires a large amount of freshwater, and the process results in the production of large volumes of flowback water along with natural gas. In this study, three tight sandstone gas wells were fractured in the Sulige gasfield (China), and a total of 103 flowback fluid samples were collected. The hydrochemical characteristics, water quality and sources of hydrochemical components in the flowback fluid were discussed. The results show that the flowback fluid is characterized by high salinity (Total dissolved solids (TDS) up to 38,268 mg/L, Cl^- up to 24,000 mg/L), high concentrations of metal ions (e.g., Fe, Sr²⁺, Ba²⁺) and high chemical oxygen demand (COD). The flowback fluid is a complex mixture of fracturing fluid and formation water, and its composition is impacted by water-rock interactions that occur during hydraulic fracturing. The major contaminants include COD, Fe, Ba²⁺, Cl^-, Mn and pH, which constitute a high risk of environmental pollution. Meanwhile, chemical elements such as K, Ba and Sr are unusually enriched in the flowback fluid, which has an excellent potential for recycle of chemical elements. The Sulige gasfield's flowback fluid recovery methods and treatment scenarios were discussed, taking into consideration the pollution and resource characteristics of the flowback fluid. Options for dealing with the flowback fluid include deep well reinjection, reuse for making up fracturing fluid, recycling of chemical elements and diverse reuse of flowback water. This research offers guidance for managing the fracturing flowback fluid in unconventional oil and gas fields.