Direct measurement of three-dimensional forces at the medial meniscal root: A validation study

The posterior medial meniscal root (PMMR) experiences variable and multiaxial forces during loading. Current methods to measure these forces are limited and fail to adequately characterize the loads in all three dimensions at the root. Our novel technique resolved these limitations with the installation of a 3-axis sensing construct that we hypothesized would not affect contact mechanics, would not impart extraneous loads onto the PMMR, would accurately measure forces, and would not deflect under joint loads. Six cadaveric specimens were dissected to the joint capsule and a sagittal-plane, femoral condyle osteotomy was performed to gain access to the root. The load sensor was placed below the PMMR and was validated across four tests. The contact mechanics test demonstrated a contact area precision of 44 mm² and a contact pressure precision of 5.0 MPa between the pre-installation and post-installation states. The tibial displacement test indicated an average bone plug displacement of < 1 mm in all directions. The load validation test exhibited average precision values of 0.7 N in compression, 0.5 N in tension, 0.3 N in anterior-posterior shear, and 0.3 N in medial-lateral shear load. The bone plug deflection test confirmed < 2 mm of displacement in any direction when placed under a load. This is the first study to successfully validate a technique for measuring both magnitude and direction of forces experienced at the PMMR. This validated method has applications for improving surgical repair techniques and developing safer rehabilitation and postoperative protocols that decrease root loads.