Highly efficient U(VI) capture from nuclear wastewater by an easily synthesized lignin-derived biochar: Adsorption...

The efficient recycling of uranium (U) by adsorbents remains challenging due to the strong interference from coexisting impurities, insufficient desorption efficiency, and weak irradiation instability. In this work, a novel lignin-derived biochar (AL/BC) with high surface area and abundant functional groups was developed through a green and simple pyrolysis process, and an adsorbent for U(VI) capture was used. The optimist AL/BC-600 exhibited ultrahigh adsorption capacity for U(VI) of 4007 mg/g, possessing a wide pH range of 1-11, and powerful anti-interference ability when coexisting with various common cations and anions. In addition, AL/BC-600 showed high tolerance even under strong irradiation at a dose of 350 kGy. Most importantly, after the tenth round of the adsorption-desorption cyclic utilization, the adsorption efficiency and desorption rate of AL/BC-600 were actually over 95% and 80%, respectively. Hence, this study provides a green and simple process for synthesizing a novel adsorbent for highly efficient U(VI) capture, not only paving a path for alleviating the increasingly serious energy crisis, but also facilitating the low-carbon and circular development of lignin.