Push out bond strength of hydraulic cements used at different thicknesses

The aim of this study was to compare the pushout bond strength (POBS) of three hydraulic cements, when used at thicknesses of 3 and 5 mm.

78 root slices of 3 and 5 mm of thickness were obtained from human teeth. Cylindrical cavities of 1.4 mm of diameter were drilled and filled with Biodentine (BD), Totalfill Root Repair paste (TF) or ProRoot MTA White (PMTA). Pushout tests were performed 21 days later. The fracture pattern of each sample was also analyzed. POBS data were analyzed with Welch and Brown-Forsythe and Tamhane's post hoc tests and a Weibull analysis was also performed.

In the 3 mm group, TF showed significantly lower bond strength than BD and PMTA. In the 5 mm group, BD showed significantly higher bond strength than TF. Both BD and TF showed higher bond strength when the thickness of the sample increased, while PMTA did not.

TF and BD achieve higher pushout bond strength resistance when used at a thickness of 5 mm than at 3 mm, while the mean resistance of PMTA is less influenced by the thickness. At 5 mm of thickness, BD and PMTA exhibit similar resistance to displacement. However, the behavior of BD is more predictable than that of its predecessor. BD is a reliable hydraulic cement for clinical situations where thick cavities need to be filled and displacement resistance plays an important role. Clinicians need to consider choosing specific hydraulic cements according to the thickness of material to be used.