Model experiment research on HPTL anchoring technology for coal-rock composite roof in deep roadway

Since the western region of China, which is typical of extraordinary resource endowments, has gradually emerged as the major mining zone in China, the mining of thick coal seams and roadways with coal-rock composite roof have become more and more common in this region. However, it is extremely difficult to realize safe and effective maintenance and control of such roadways due to the differences in natural endowments of coal-rock masses. With the roadway with coal-rock composite roof of Hulusu Coal Mine in western China as the engineering background, experiment research on large-scale similarity model was conducted through comprehensive measures such as the pneumatic loading system, the surrounding rock stress monitoring system, the roadway deformation monitoring system, the bolt load monitoring system, and the displacement field monitoring system in this paper. According to the results of the experiment, the control effects of the three support systems on the roadway with coal-rock composite roof were significantly different. When the single support of short anchor bolts was applied, the comparatively low initial anchor-hold failed to constrain the initial micro deformation of the roof. Consequently, wide-range fractures of the roof were triggered at a loading pressure of 0.8 MPa. In the meanwhile, the deep surrounding rocks witnessed a downward inflection point in stress, accompanied by the possibility of the collapse of the thin-layer anchorage zone at any time. As for the support combining both short anchor bolts and long anchor cables, though a reinforced effect on the bolt anchorage zone could be achieved with the help of the cables, the active reinforcement capacity of the bolt was limited. The bolt anchorage zone was the first to be damaged at a loading pressure of 0.9 MPa, which would subsequently affect the effective bearing capacity of the deep surrounding rocks. In the application of the single support of high-strength long anchor bolts, the long bolts with high pre-tightening force were able to lock multiple groups of coal-rock strata to form a thick-layer anchorage bearing structure capable of withstanding a load as high as 1.0 MPa. The crash and collapse of the coal wall eventually caused the subsidence of the roof. Based on the intense dynamic load experiment and the feedbacks of engineering application outcomes in the field, it was concluded that the high-pretension thick-layer (HPTL) anchoring technology can effectively constrain the deformation of roadways with coal-rock composite roof with favorable application outcomes.