The Structure and Properties of Laser-Cladded Inconel 625/TiC Composite Coatings

This article presents production results concerning metal matrix composite-coatings made using the laser-cladding technology. The enhancement of the wear resistance of the material surface is the one of the main goals accompanying the manufacturing of composite coatings. Nickel-based superalloys are used in several industries because they are characterized by a number of desirable properties including high tensile and fatigue strength as well as resistance to high-temperature corrosion in aggressive environments. One of the most interesting materials from the group of superalloys is Inconel 625, used as a matrix material in tests discussed in this article. However, nickel-based superalloys are also characterized by an insufficient wear resistance of the surface, therefore, in relation to the tests discussed in this article, Inconel 625-based composite coatings were reinforced by adding 10%, 20% and 40% of titanium carbide particles. The addition of hard phases, i.e., TiC, WC or SiC particles can have a positive effect on the erosion resistance of cladded specimens. The aim of the experiment was to determine the impact of the titanium carbide content on the structure of the alloy and its resistance to corrosive wear, enabling the extension of the service life of Inconel 625/TiC composite coatings. The investigation included microhardness tests, corrosion resistance analysis, penetrant tests, macrostructure and microstructure analyses and X-ray diffraction (XRD) tests. The TiC particles increased the hardness of the coatings and, in general, had a negative impact on the corrosion resistance of pure Inconel 625 coatings. However, the increased homogeneity of composite coatings translated into the improvement of corrosion resistance.