Fire Resistance Evaluation of Concrete Beams and Slabs Incorporating Natural Fiber-Reinforced Polymers

This paper presents a numerical study to evaluate the fire resistance of concrete beams and slabs incorporating natural fiber-reinforced polymers (FRP). A validated finite element model was applied to carry out a series of numerical studies on fire-exposed reinforced concrete (RC) beams and slabs strengthened with conventional and bio-based FRP composites. The model calculates the temperature-dependent moment-curvature relationship for various segments of the member at each time step, which are then used to calculate the moment capacity and deflection of the member. The variables in the beams and slabs include different strengthening techniques (externally bonded FRP and near-surface mounted FRP), different fiber composites, and fire insulation schemes (uninsulated and insulated). The results from the study indicate that the bio-based FRP-strengthened RC members undergo a faster degradation in moment capacity and also experience higher deflections under fire exposure. This leads to a lower fire resistance in RC members with bio-based FRP composites compared to beams and slabs with conventional FRP-strengthened concrete members. The addition of fire insulation to the bio-based FRP-strengthened members can enhance their fire performance and help achieve the required fire resistance ratings for use in building applications. In this study, the NSM CFRP-strengthened RC beams were found to have a fire resistance of 3 h without any fire insulation; however, the bio-based FRP-strengthened beams required a layer of vermiculite-gypsum-based fire insulation material (of about 25 mm) to achieve similar fire resistance.