Spatial distributions of airborne transmission risk on commuter buses: Numerical case study using computational fluid...

Commuter buses have a high passenger density relative to the interior cabin volume, and it is difficult to maintain a physical/social distance in terms of airborne transmission control. Therefore, it is important to quantitatively investigate the impact of ventilation and air-conditioning in the cabin on the airborne transmission risk for passengers. In this study, comprehensive coupled numerical simulations using computational fluid and particle dynamics (CFPD) and computer-simulated persons (CSPs) were performed to investigate the heterogeneous spatial distribution of the airborne transmission risk in a commuter bus environment under two types of layouts of the ventilation system and two types of passenger densities. Through a series of particle transmission analysis and infection risk assessment in this study, it was revealed that the layout of the supply inlet/exhaust outlet openings of a heating, ventilation, and air-conditioning (HVAC) system has a significant impact on the particle dispersion characteristics inside the bus cabin, and higher infection risks were observed near the single exhaust outlet in the case of higher passenger density. The integrated analysis of CFPD and CSPs in a commuter bus cabin revealed that the airborne transmission risk formed significant heterogeneous spatial distributions, and the changes in air-conditioning conditions had a certain impact on the risk.