Municipal wastewater treatment with corrugated PVC carrier anaerobic baffled reactor

The anaerobic baffled reactor (ABR) is a promising solution for decentralized wastewater treatment due to its low operation cost as compared to the activated sludge process, but it requires comparatively higher hydraulic retention time (HRT). This ultimately increases land requirement, capital and construction cost of treatment plant. This study investigates performance of ABR using polyvinyl chloride (PVC) corrugated pipe as carrier media to improve biomass retention capacity and treatment performance of reactor with the aim to reduce HRT. Comparative performance of two ABRs with and without carrier media was analyzed under mesophilic conditions (35 ± 1 °C) for organics and total suspended solids (TSS) removal at HRTs of 24, 18, 12, 8, 6 and 4 h. Results showed that at HRTs of 24-08 h, the organics removal performance of the carrier anaerobic baffled reactor (CABR) was better than ABR and was in the range of 77-81% for CABR as compared to 64-70% for ABR. However, on further decrease in HRT to 6 h, CABR sustained the treatment with organics removal of 80%, while ABR performance reduced to 58%, creating a performance difference of 38%. Average total suspended solids (TSS) removal was in the range of 76-83% at all HRTs for both reactors. Therefore, this study identified CABR with PVC carrier media as an effective low-HRT reactor for organics and SS removal with less land area requirement.