Related Experiment Video
Updated: Aug 9, 2025

Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
Published on: December 7, 2015
Heavy Ion Displacement Damage Effect in Carbon Nanotube Field Effect Transistors
Peng Lu1, Maguang Zhu2,3, Peixiong Zhao4
1Institute of Microelectronics, Chinese Academy of Science, Beijing 100029, China.
Abstract:
Recent advances in carbon nanotube (CNT)-based integrated circuits have shown their potential in deep space exploration. In this work, the mechanism governing the heavy-ion-induced displacement damage (DD) effect in semiconducting single-walled CNT field effect transistors (FETs), which is one of the factors limiting device robustness in space, was first and thoroughly investigated. CNT FETs irradiated by a Xe ion fluence of 1012 ions/cm2 can maintain a high on/off current ratio, while transistors' performance failure is observed as the ion fluence increased to 5 × 1012 ions/cm2. Controllable experiments combined with numerical simulations revealed that the degradation mechanism changed as the nonionizing radiation energy built up. The trap generation in the gate dielectric, instead of the CNT channel, was identified as the dominating factor for the high-energy-radiation-induced device failure. Therefore, CNT FETs exhibited a >10× higher DD tolerance than that of Si devices, which was limited by the channel damage under irradiation. More importantly, the distinct failure mechanism determined that CNT FETs can maintain a high DD tolerance of 2.8 × 1013 MeV/g as the technology node scales down to 45 nm node, suggesting the potential of CNT-based VLSI for high-performance and high-robustness space applications.
More Related Videos
Related Concept Videos
Field Effect Transistor
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
P-N junction
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...

