Intercalated chitosan-ionic liquid ionogel in SnO nanoplate: band gap narrow and adsorption-photodegradation process

Ionogels are a category of hybrid material containing ionic liquid stabilized by polymeric network. These composites have some applications in solid-state, energy storage devices and environmental studies. In this research, chitosan (CS), ethyl pyridinium iodide ionic liquid (IL), and ionogel (IG) consisting of chitosan and ionic liquid were used in the preparation of a SnO nanoplate (SnO-IL, SnO-CS and SnO-IG). For the preparation of the ethyl pyridinium iodide, a mixture of pyridine and iodoethane (1: 2 molar ratio) was refluxed for 24 hours. The ionogel was formed using ethyl pyridinium iodide ionic liquid in chitosan that was dissolved in acetic acid (1 % v/v). By increasing NH₃∙H₂O, the pH of the ionogel reached 7-8. Then, the resultant IG was mixed with SnO in an ultrasonic bath for 1 h. The microstructure of the ionogel was involved as assembled unit via π-π, electrostatic and hydrogen bonding interactions to be three-dimensional networks. The intercalated ionic liquid and chitosan influenced the stability of the SnO nanoplates and improved band gap values. When chitosan was contained as the interlayer space of the SnO nanostructure, the resulting biocomposite formed a well-ordered flower-like SnO structure. These hybrid material structures were characterized by FT-IR, XRD, SEM, TGA, DSC, BET, and DRS techniques. The changes in the band gap values for photocatalysis applications were investigated. In the case of SnO, SnO-IL, SnO-CS, and SnO-IG, the band gap energy was 3.9, 3.6, 3.2, and 2.8 eV, respectively. The dye removal efficiency of SnO-IG was 98.5, 98.8, 97.9, and 98.4 % via the second-order kinetic model for Reactive Red 141, Reactive Red 195, Reactive Red 198, and Reactive Yellow 18, respectively. The maximum adsorption capacity of SnO-IG was 540.5, 584.7, 1501.5, and 1100.1 mg/g for Red 141, Red 195, Red 198, and Yellow 18 dyes, respectively. Also, an acceptable result (96.47 % dye removal) was obtained with the prepared SnO-IG biocomposite for dye removal from textile wastewater.