Related Experiment Video
Updated: Aug 9, 2025

Image-based Lagrangian Particle Tracking in Bed-load Experiments
Published on: July 20, 2017
Percolation of a fine particle in static granular beds
Song Gao1, Julio M Ottino1,2,3, Paul B Umbanhowar1
1Department of Mechanical Engineering, Northwestern University, Evanston, Illinois 60208, USA.
Abstract:
We study the percolation of a fine spherical particle under gravity in static randomly packed large-particle beds with different packing densities ϕ and large to fine particle size ratios R ranging from 4 to 7.5 using discrete element method simulations. The particle size ratio at the geometrical trapping threshold, defined by three touching large particles, R_{t}=sqrt[3]/(2-sqrt[3])=6.464, divides percolation behavior into passing and trapping regimes. However, the mean percolation velocity and diffusion of untrapped fine particles, which depend on both R and ϕ, are similar in both regimes and can be collapsed over a range of R and ϕ with the appropriate scaling. An empirical relationship for the local percolation velocity based on the local pore throat to fine particle size ratio and packing density is obtained, which is valid for the full range of size ratio and packing density we study. Similarly, in the trapping regime, the probability for a fine particle to reach a given depth is well described by a simple statistical model. Finally, the percolation velocity and fine particle diffusion are found to decrease with increasing restitution coefficient.
More Related Videos
11:51Visually Based Characterization of the Incipient Particle Motion in Regular Substrates: From Laminar to Turbulent Conditions
Published on: February 22, 2018
07:47Experimental Protocol to Investigate Particle Aerosolization of a Product Under Abrasion and Under Environmental Weathering
Published on: September 16, 2016
Related Concept Videos
Colloidal precipitates
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...
Colloids and Suspensions
Coagulation
Filtration
Colloids