Related Experiment Video
Updated: Aug 9, 2025

Preparation and Application of a New Bacterial Biosensor for the Presumptive Detection of Gunshot Residue
Published on: May 9, 2019
Should inorganic or organic gunshot residues be analysed first?
Virginie Redouté Minzière1, Olivier Robyr2, Céline Weyermann1
1Ecole des Sciences Criminelles, Université de Lausanne, Switzerland.
Abstract:
Gunshot residues (GSR) collected during the investigation of firearm-related incidents can provide useful information for the reconstruction of the events. Two main types of GSR traces can be targeted by forensic scientists, the inorganic (IGSR) and the organic GSR (OGSR). Up to now, forensic laboratories have mainly focused on the detection of inorganic particles on the hands and clothes of a person of interest using carbon stubs analysed by scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM/EDS). Several approaches have been proposed to also analyse the organic compounds since they might bring additional information for the investigation. However, implementing such approaches might disrupt the detection of IGSR (and vice versa depending on the applied sequence of analysis). In this work, two sequences were compared for the combined detection of both types of residues. One carbon stub was used for collection, and the analysis was performed either by targeting the IGSR or the OGSR first. The aim was to evaluate which one allows maximum recovery of both types of GSR while minimising losses that might occur at different stages of the analysis process. SEM/EDS was used for the detection of IGSR particles while an ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) was used for the analysis of OGSR compounds. Extracting OGSR first required the implementation of an extraction protocol that did not interfere with the IGSR particles present on the stub. Both sequences allowed good recovery of the inorganic particles since no significant difference was observed in the detected concentrations. However, OGSR concentrations were lower after IGSR analysis than before for two compounds (ethyl and methylcentralite). Thus, it is advised to extract rapidly the OGSR before or after IGSR analysis to avoid losses during the storage and analysis processes. The data also indicated that there was a low correlation between IGSR and OGSR highlighting the potential of a combined detection and analysis of both types of GSR.
Related Concept Videos
Gravimetry: Inorganic And Organic Precipitating Agents
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Maxam-Gilbert Sequencing
Challenges of the Maxam-Gilbert Method
The...
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Mass Spectrometry: Isotope Effect
SN2 Reaction: Mechanism
The presence of the more electronegative halogen in the substrate creates a polarized carbon-halide bond. The halide pulls the electron cloud generating an electrophilic center at the carbon atom. Thus, the carbon atom carries a partial positive charge while the halide has a...

